Skip to main content
Back To Top Top Back To Top
This website publishes administrative rules on their effective dates, as designated by the adopting state agencies, colleges, and universities.

Rule 4101:4-3-01 | Accepted engineering practice and approved standards.

 

(A) Where references are made in Chapters 4101:4-1 to 4101:4-10 of the Administrative Code to the applicable section of the "ASME Boiler and Pressure Vessel Code" or to other standards or publications, this rule identifies the specific edition of the code, standard, or publication that is adopted. Conformity to the applicable technical provisions, requirements, recommendations, and determinations in the codes, standards or other referenced publications adopted in "Table 4-3-01" of this rule, is prima-facie evidence of conformity with accepted engineering practice or with an approved standard.

(B) The board of building standards adopts existing published standards by year of issue as shown in "Table 4-3-01" of the Administrative Code as well as amendments, supplements, and addenda subsequently published prior to issuance of the next edition by the same authority in accordance with section 4104.02 of the Revised Code.

AuthorityEdition DateDesignationTitle
ASME2023BPVC -Section I (see footnote a)Rules for Construction of Power Boilers.
ASME2023BPVC -Section IIMaterials. Part A-Ferrous. Part B-Non-Ferrous. Part C-Welding Rods, Electrodes and Filler Metals. Part D-Properties.
ASME2023BPVC -Section IIIRules for Construction of Nuclear Facility Components.
ASME2023BPVC -Section IVRules for Construction of Heating Boilers.
ASME2023BPVC -Section VNondestructive Examination.
ASME2023BPVC -Section VIRecommended Rules for Care and Operation of Heating Boilers.
ASME2023BPVC -Section VIIRecommended Guidelines for the Care of Power Boilers.
ASME2023BPVC -Section VIIIRules for Construction of Pressure Vessels-Division 1.
ASME2023BPVC -Section VIIIRules for Construction of Pressure Vessels-Division 2, Alternative Rules.
ASME2023BPVC -Section VIIIPressure Vessels-Division 3, Alternative Rules for Construction of High Pressure Vessels.
ASME2023BPVC -Section IXWelding, Brazing, and Fusing Qualifications.
ASME2023BPVC -Section XFiber-Reinforced Plastic Pressure Vessels.
ASME2023BPVC -Section XI Rules for Inservice Inspection of Nuclear Reactor Facility Components.
ASME2023 BPVCCode Cases: Boilers and Pressure Vessels.
ASME2022B 31.1Power Piping.
ASME2021CSD-1Controls and Safety Devices for Automatically Fired Boilers.
NFPA2021NFPA 85Boiler and Combustion Systems Hazards Code
National Board2023NBICNational Board Inspection Code.
National BoardJul. 2012, Rev. 1NB-27A Guide for Blowoff Vessels.
National Board Jul. 2023NB-263 Rules for Commissioned Inspectors (RCI-1).
National BoardJul. 2020, Rev. 10NB-371Accreditation of Owner-User Inspection Organizations (OUIO).

Footnote a: For riveted construction, see "ASME, BPVC-Section I, Power Boilers, Part PR (1971 edition)."

Last updated July 2, 2024 at 10:15 AM

Supplemental Information

Authorized By: 4104.02 (A)(1)
Amplifies: 4104.02 (B)
Five Year Review Date: 7/1/2029
Prior Effective Dates: 7/1/1978, 11/1/1980, 7/1/1984, 2/1/1987, 1/1/1990, 1/1/1993, 2/1/1996, 4/1/1999, 4/1/2001, 1/1/2002, 3/1/2005, 7/1/2007, 11/1/2007, 3/1/2013, 1/1/2015, 8/1/2018